YZ-C220T 全自動裁線剝皮扭線機
YZ-C220T
針對電子線、矽膠線、鐵弗龍線、玻璃纖維線、隔離線、同軸線、套管等，全自動剪裁、剝皮、半剝、
中間剝皮、扭線特殊功能；可瞬間變換電線規格及尺寸。
This machine adoptable to VSF, IV, KV, Teflon, coaxial cable & ETC. Full Automatic cutting, stripping,
half-stripping. middle stripping and twisting, this machine also adoptable for diversified sizes wires.
扭線方式：
1. 前端扭線 Front twist
2. 後端扭線 Rear twist
3. 兩端同方向扭線 Both ends same direction twist
4. 兩端反方向扭線 Both ends different direction twist
|
機 型 MODEL |
FE-220T |
|
外觀尺寸 DIMENSION |
450mmX720mmX360mm |
|
重 量 WEIGHT |
39Kgs(NET) |
|
電 源 POWER SUPPLY |
AC 110V/220V 50/60HZ |
|
消耗電力 POWER CONSUMPTION |
MIN. 20W~MAX. 220W |
|
切斷長度 CUTTING LENGTH |
0.1~60000mm |
|
剝皮長度 STRIPPING LENGTH |
0.1~99mm ( 視線材而定 Depends on wire material ) 三段剝皮可至999mm |
|
扭線長度 TWISTING LENGTH |
0.1~99mm ( 視線材而定 Depends on wire material) |
|
切斷誤差 CUTTING TOLERANCE |
可修正 Adjustable |
|
適用線徑 APPLICABLE SIZE |
AWG#14~AWG#32 ( 視線材而定 Depends on wire material) |
電動式電線剝皮扭線機
◆專門用於細線(線徑0.2mm~2.5mm)剝皮扭線。
◆隔離線之操作2~3條一次完成。
◆剝扭長度2~15mm，一分鐘四十條。
◆機型小、耗電量少。
◆可單動或連動選擇使用。
◆刀距可微調42格數(每調一格0.03mm)。
◆DC步進馬達，扭力穩定，故障率低，只需轉換即可適用於110V/220V。
◆Specially suitable for kinking wire diameter from 0.2mm to 2.5mm.
◆Stripping and kinking of 2 or 3 wires can be completed simultaneously.
◆Stripping and kinking with a length from 2mm to 15mm. 40 wires can be completed in one minute.
◆Small size; power saving.
◆Can be using in single and continue proceeding.
◆Can be adjusted to 42 sizes (each size changes for 0.03mm)
◆Dc motor design can stabilize the twist strength and eliminate machine shut down. Both 110V & 220V exchangeable.
◆隔離線之操作2~3條一次完成。
◆剝扭長度2~15mm，一分鐘四十條。
◆機型小、耗電量少。
◆可單動或連動選擇使用。
◆刀距可微調42格數(每調一格0.03mm)。
◆DC步進馬達，扭力穩定，故障率低，只需轉換即可適用於110V/220V。
◆Specially suitable for kinking wire diameter from 0.2mm to 2.5mm.
◆Stripping and kinking of 2 or 3 wires can be completed simultaneously.
◆Stripping and kinking with a length from 2mm to 15mm. 40 wires can be completed in one minute.
◆Small size; power saving.
◆Can be using in single and continue proceeding.
◆Can be adjusted to 42 sizes (each size changes for 0.03mm)
◆Dc motor design can stabilize the twist strength and eliminate machine shut down. Both 110V & 220V exchangeable.
| 外觀尺寸 DIMENSION | 360mmX280mmX180mm |
| 重 量 WEIGHT | 13.5Kgs |
| 電 源 POWER SUPPLY | AC 110V/220V DC 轉換式 |
| 剝扭長度 LENGTH KINK STRIP | 2~15mm |
| 適用線徑 APPLICABLE SIZE | 0.2~2.5mm Ø |
氣動剝皮機
◆機體組合均採DIY式，維修容易，故障率低，不佔空間。
◆可視需要選擇氣動式或電磁式腳踏開關。
◆採鋁合金氣缸及機體，堅韌耐磨，且不易銹蝕，操作簡便。
◆可調式結構視線材粗細，平刀、圓刀適用範圍較大，節省購刀費用。
◆一般 AC/DC 電源線、電子線、電腦線、併排線均可使用。
◆Body assembly can do it yourself, easy maintenance, low malfunction and impact size.
◆Either air or solenoid foot switch is avialable.
◆Whole body made by aluminum so it can long-wearing,rustless and easy operation.
◆Flexible inlet structure can fit wire and let level blade, round blade expand using range, saving blade cost.
◆Suit for AC/DC power cord, electronic wire, flat cable and coaxial cable.
◆可視需要選擇氣動式或電磁式腳踏開關。
◆採鋁合金氣缸及機體，堅韌耐磨，且不易銹蝕，操作簡便。
◆可調式結構視線材粗細，平刀、圓刀適用範圍較大，節省購刀費用。
◆一般 AC/DC 電源線、電子線、電腦線、併排線均可使用。
◆Body assembly can do it yourself, easy maintenance, low malfunction and impact size.
◆Either air or solenoid foot switch is avialable.
◆Whole body made by aluminum so it can long-wearing,rustless and easy operation.
◆Flexible inlet structure can fit wire and let level blade, round blade expand using range, saving blade cost.
◆Suit for AC/DC power cord, electronic wire, flat cable and coaxial cable.
| 外觀尺寸 DIMENSION | 420mmX250mmX160mm |
| 重 量 WEIGHT | 12Kgs |
| 氣 壓 AIR PRESSURE | 5~7Kgs |
| 衝 程 STROKE | 65mm |
| 適用線徑 APPLICABLE SIZE | MAX. 9mm Ø |
直立雙刀式剝皮機
◆只要輕輕一調，一次可剝單條或多條，適用線徑AWG#18~AWG#32。
◆雙刀設計 " L" 型組合，可準確剝出所需剝皮長度，亦可單刀使用。
◆使用計時器控制，可準確的切斷及剝皮。
◆吹氣裝置可清除剝皮後所遺留之線屑。
◆適用於一般電源線、隔離線、電腦纜線等；可視需要全剝或半剝。
◆寬刀的組合和夾座到刀的短間距，利於剝電腦線之心線及隔離線，使剝線更方便更有效率。
◆With slight adjustment can apply to strip wire range from AWG#18~32, even single PC or multiple PCS.
◆Double blade design with "L" type assembly can accurately meet stripping need, even single blade will do accordingly.
◆Use timer control system to ensure accurately cut and properly strip.
◆Air blow installation to eliminate defect which causing from stripped jacket.
◆Apply to power cord, shield wire, computer cable etc. With full stripping or Half-Stripping select as need.
◆Wider blade assembly and shorter blade interval to improve computer inner insulator stripping to be more convenient and efficiency.
◆雙刀設計 " L" 型組合，可準確剝出所需剝皮長度，亦可單刀使用。
◆使用計時器控制，可準確的切斷及剝皮。
◆吹氣裝置可清除剝皮後所遺留之線屑。
◆適用於一般電源線、隔離線、電腦纜線等；可視需要全剝或半剝。
◆寬刀的組合和夾座到刀的短間距，利於剝電腦線之心線及隔離線，使剝線更方便更有效率。
◆With slight adjustment can apply to strip wire range from AWG#18~32, even single PC or multiple PCS.
◆Double blade design with "L" type assembly can accurately meet stripping need, even single blade will do accordingly.
◆Use timer control system to ensure accurately cut and properly strip.
◆Air blow installation to eliminate defect which causing from stripped jacket.
◆Apply to power cord, shield wire, computer cable etc. With full stripping or Half-Stripping select as need.
◆Wider blade assembly and shorter blade interval to improve computer inner insulator stripping to be more convenient and efficiency.
| 外觀尺寸 DIMENSION | 200mmX280mmX320mm |
| 重 量 WEIGHT | 13.5Kgs |
| 電 源 POWER SUPPLY | AC 110V/220V 50/60Hz |
| 氣 壓 AIR PRESSURE | 5~7Kgs |
| 剝皮長度 STRIPPING LENGTH | 單刀 One blade 20mm 雙刀 Double blade MAX.5mm |
直立排線剝皮機
◆改良傳統電腦心線剝皮用腳踏手拉方式，演進成前夾後退方式，節省體力之最佳機型。
◆操作時採平面左右移動方式，縮短線、夾座距離，使電腦線或特殊短線均可本機使用。
◆特殊結構，速度快，電源線及一般電線，半剝、全剝，調整容易。
◆More advanced than traditional stripper, can strip computer cable with simple strip style and save force.
◆Shorten wire's clamp and strip interval to apply to short strip wire such as computer cable.
◆Fast speed easy adjust, apply to semi-strip and full strip.
◆操作時採平面左右移動方式，縮短線、夾座距離，使電腦線或特殊短線均可本機使用。
◆特殊結構，速度快，電源線及一般電線，半剝、全剝，調整容易。
◆More advanced than traditional stripper, can strip computer cable with simple strip style and save force.
◆Shorten wire's clamp and strip interval to apply to short strip wire such as computer cable.
◆Fast speed easy adjust, apply to semi-strip and full strip.
| 外觀尺寸 DIMENSION | 260mmX150mmX270mm |
| 重 量 WEIGHT | 9.5Kgs |
| 氣 壓 AIR PRESSURE | 5~7Kgs |
| 剝皮長度 STRIPPING LENGTH | 20mm |
桌上型排線剝皮機
◆本機使用全氣壓式，不需其他電力共用。
◆使用於排線 1.27、2.0、2.54 PITCH可全剝、半剝。
◆操作安全、速度快、準確度高。
◆耗氣量小、故障率低、維修容易。
◆使用平刀或齒刀，視線材而定。
◆This machine is applied as air pressure without any electricity related.
◆Apply to flat cable 1.27, 2.0, 2.5, 2.54 pitch for either full stripping or half-stripping.
◆Easy operation, high speed, high precision.
◆Less air consumption, less breakdown, easy maintenance.
◆Base on different wire to exchange flat or V-blade as need
刀具：
◆使用於排線 1.27、2.0、2.54 PITCH可全剝、半剝。
◆操作安全、速度快、準確度高。
◆耗氣量小、故障率低、維修容易。
◆使用平刀或齒刀，視線材而定。
◆This machine is applied as air pressure without any electricity related.
◆Apply to flat cable 1.27, 2.0, 2.5, 2.54 pitch for either full stripping or half-stripping.
◆Easy operation, high speed, high precision.
◆Less air consumption, less breakdown, easy maintenance.
◆Base on different wire to exchange flat or V-blade as need
| 外觀尺寸 DIMENSION |
360mmX520mmX400mm |
| 重 量 WEIGHT |
38Kgs |
| 氣 壓 AIR PRESSURE |
5~7Kgs |
| 剝皮長度 STRIPPING LENGTH |
2~40 mm |
| 使用範圍 CAPACITY |
2~60 PIN |
刀具：
